Automated Thermostats & Run-Time Controllers
The design of certain heating systems (i.e. central systems), makes installing individual meters or submeters either cost prohibitive or otherwise unpractical. This is where we use either automated thermostats and/or run-time controllers.
By measuring the amount of time a unit runs (and is delivering heat), and measuring any applicable temperatures, we are able to collect data on individual units to determine usage. By using the manufacturer’s specs on the heating unit, and the time or time and temperature data, we are able to determine the individual unit’s gas usage.
There two types of systems that typically used. The first type of system measures timing and is used primarily for Forced Hot Air Furnaces, Domestic Hot Water Heaters and Fireplaces. The second type of system measures both time and temperature and is used primarily for Baseboard Radiation and Fan Coil systems. Following are a few of the products we carry:
The T-32-P universal thermostat is a perfect mix of esthetics, intuitive operation and performance at an amazingly affordable price. The T-32-P is compatible with most residential and commercial HVAC systems and is ideally suited for use with Comfort System zoning systems.
The C2TL series thermostat allows the managers to set the temperature to the limits they want. This allows you to use the same thermostat for both normal residential and elderly properties as well where more lenient limits may be required.
Digital Run-Time Converter (CPO-RTC)
The CPO-RTC device monitors, calculates, and decodes run-time of a constant running device or circuit and converts the data into an accurate, periodic pulse output for connection to data storage and reporting devices.
Digital Run-Time Converter (CPO-RTC-Temp)
The CPO-RTC-Temp device monitors, calculates, and decodes run-time of a constant running device or circuit such and converts the data into an accurate, periodic pulse output for connection to data storage and reporting devices.
Gas Meters and Accessories
The aluminum class AC-250 is the industry’s most cost-effective gas meter for residential applications. It is unequaled for accuracy retention and for life cycle maintenance economies.
The AT-210 and AT-250 meters have a 5 PSIG Maximum Allowable Operating Pressure and can flow either 210 or 250 cubic feet per hour at 1/2” W.C. differential pressure.
The AL-425 diaphragm meter is ideally suited for larger residential or small commercial/industrial installations. Compatible with automatic meter reading technology.
The AC-630, another of the diaphragm meters in the Elster American Meter product line, provides the customer with rugged durability and accurate long-term performance. Compatible with automatic meter reading technology.
Elster Curb Meter
Curb meters were designed to measure various gases under special operational applications such as in underground vaults.
Elster BK-G4 Meter
The BK-G4 is a synthetic diaphragm meter with the latest technology and injection-molded aluminum body. All Elster-American gas meters are compatible with hardwired Automatic Meter Reading (AMR) or wireless AMR, including Inovonics, Hexagram/Aclara Star Network, Speedread and Radiopath.
Norgas Gallus 2000
The Gallus 2000 is made to measure accurately the volumes of natural gas used for domestic appliances. The pulse generator can then send the data to required devices for volume totalization. All Gallus gas meters are compatible with hardwired Automatic Meter Reading (AMR) or wireless AMR, including Inovonics, Hexagram/Aclara Star Network, Speedread and Radiopath.
Badger® Read-o-Matic® System
Read-o-Matic is the “just-right” solution when you need an economical visual remote read system you can count on. The system consists of the reputable Badger Recordall® meter and the reliable Read-o-Matic generator and remote register.
Meter Connection Sets
Meter connection sets and meter bars to facilitate installation of domestic (residential) meters. A meter connection set includes (2) Meter Swivels, (2) Meter Nuts, and (2) Meter Washers.
Intellimeter BTU Meter
Our ultrasonic compact energy meter for measuring the energy consumption in heating/cooling Applications is available from ½” (0.6m3/h) to 2” (15m3/h) in diameter with a temperature range from 4oC to 95oC. Equipped with an Internal high capacity 3.6V lithium ion battery (good for 10 years) or 120 V power supply. Additional service types available on request.
The Intellimeter BTU meters meet the requirements of the European Measuring Instruments Directive (MID) and the standard EN 1434 class B. Communication protocol: M-Bus.
MULTIFAMILY UTILITY COMPANY CUSTOMER TESTIMONIALS
“Multifamily Utility Company has done an excellent job with our properties. They are very professional and have seamlessly READ MORE
“We have calculated the increase in property value that comes along with submetering. For instance, on a property with 285 READ MORE
P.O. Box 86531
San Diego, CA 92138-6531
Email | (800) 266-0968
P.O. Box 86229
San Diego, CA 92138-6229
Account Managers work directly with the property to assist with billing and training.
Email | (800) 266-0968